DT Swiss offers replacement freehub body kits for their 180, 240 and 350 series hubs. These kits allow simple, tool-free conversion between Campagnolo and Shimano road, or Shimano mountain and Sram XD drivers. DT's hub design allows this conversion without the need for replacing the axle or redishing the wheel. These kits are also an excellent replacement part for freehubs with worn bearings or heavily notched splines. Pair a new freehub with DT's Rapid Drive 54 Tooth Ratchet for faster engagement and a slight reduction in weight over stock.
To convert your freehub, start with removing the drive side end cap. If removal is difficult, a skewer may be inserted through the opposite side of the hub and angled to contact the end cap's inner surface. Once contact is made, a mallet may be used to tap lightly on the skewer end. The freehub will slide easily off the axle. Keeping the arrangement of the drive clutch and springs, insert the new freehub and end cap onto the axle.
|Option||DT Swiss Part#|
|Campagnolo - QR 135||HWYABX00S1296S|
|Sram XD - QR 135||HWYAAX00S3115S|
|Sram XD - TA 142/148||HWYAAX00S3188S|
|Shimano 11 - QR 130/135||HWYABX00S2775S|