Well, this was some time ago here
Since some time ago we have a lot of snow here in Sweden.
I took the hole bike apart and cleaned every part and started to work on the Parts.
For next year, the plan is to just have an normal tlo Bar with homemade Brakelevers with an integrated Shifter.
The old Bar was okej but i was never 100% happy with it on the Roadgeo. Would need an seatangle like 76 or 77 for this bar. Maybe i will have another frame in the future but for now i´ll build this bike more as an Roadbike again.
With this, i although can start in groupraces wich would be fun.
Some of the plas are
- new tlo Bar
- new homemade Brakelevers/Shifter
- rear Derailleurhanger in carbon
- new homemade rear Derailleur in carbon
- new KMC 11sl Chain
- new homade carbon Brakes
- tune more on the Aheadset
- tune more on the Cassette
- new Lightweight Ventoux Wheels (maybe tuned)
- new homemade Skewers or u20
- tires = dugast or same like this year?
and some tuning on the Parts i allready have.
Before essambling the bike, the weight was down to 4623g.
With all the new stuff, it should be down to 42xxg. I hope to have it all together to 03/2011 but that deepend a bit on the moneyflow.
I´ll do not going to use the old Wheels any more. So if somebody is intressted in them, they are for sale.
like on that pic, it is looking today.
1707g for frame,fork,aheadset,stem,chainkeeper,cranks,bottom braket,seatkombination and clamp....is quite okej