Guest Announcements

This board is currently undergoing changes. Registration for new members is currently disabled while some changes take place. If you'd like to register please drop us an email.

Wet weather Tubular Build

Discussion on bikes, and whatever...

Wet weather Tubular Build

Postby DartanianX » Sun Apr 08, 2012 6:10 pm

Hey,

I've already got some FC 404's and some FC 808's but I'm looking for something I can ride in really windy wet races (ie Tour of Southland in NZ, Tour of Tasmania in Aus etc). So thinking Alloy and Tubular as they'll be a race wheel that I wan't to be light-ish... Also because of weather I'll be using them in there is the chance of crashing and I know Velocity rims aren't expensive so easy and cheap to replace if needed.

For rims I'm thinking Velocity Escape 16h - 20h. Hubs I'm tempted by a set of bikehubstore.com hubs for price vs weight and from what I have the read the quality is quite high too. Easy to bang some ceramic bearings in them and away I go if the stock ones aren't anything to special. Spokes I'm open to ideas. I only weigh 70kgs so weight isn't really an issue.

Any ideas or better options for any of the parts above would be awesome.

Cheers in advance.
DartanianX
Cat 5
 
Posts: 5
Joined: Sun Apr 08, 2012 5:55 pm

Re: Wet weather Tubular Build

Postby Ypsylon » Sun Apr 08, 2012 7:55 pm

Since this isn't a review, I took the liberty to move it from the review section to the road section. :D

Looking at the Velocity homepage they offer neither a 16 nor a 20h Escape rim.

I'm not sure if I'd build up a 390g rim with so few spokes anyways, especially if I wanted to use it in a mass start event.

For hubs, I'm really impressed with a pair of Ultegra hubs I have. They aren't light, but they hold up so well.

I'm building up a sorta similar wheel and chose CX-Ray spokes. Lightish, strong and bladed, so easy to build up. I also like the Sapim Polyax nipples.
"Nothing compares to the simple pleasures of a bike ride," said John F. Kennedy, a man who had the pleasure of Marilyn Monroe.
User avatar
Ypsylon
Herr Pfennig
 
Posts: 3569
Joined: Tue May 30, 2006 5:31 pm
Location: Harz Mountains

Re: Wet weather Tubular Build

Postby DartanianX » Sun Apr 08, 2012 9:57 pm

Ypsylon wrote:Since this isn't a review, I took the liberty to move it from the review section to the road section. :D

Looking at the Velocity homepage they offer neither a 16 nor a 20h Escape rim.

I'm not sure if I'd build up a 390g rim with so few spokes anyways, especially if I wanted to use it in a mass start event.

For hubs, I'm really impressed with a pair of Ultegra hubs I have. They aren't light, but they hold up so well.

I'm building up a sorta similar wheel and chose CX-Ray spokes. Lightish, strong and bladed, so easy to build up. I also like the Sapim Polyax nipples.


Sorry, first post. Getting used to the rules haha. Cheers. Yeah saw that on their website too. 24/28h It'll be then!

Yeah, I'll look into those hubs, spokes and nipples.

Cheers
DartanianX
Cat 5
 
Posts: 5
Joined: Sun Apr 08, 2012 5:55 pm


Return to General cycling

Who is online

Users browsing this forum: No registered users and 1 guest

cron